✨ New Arrivals Just Dropped!Explore
Husqvarna Guide Bar X-Force .325" 1.3mm
HomeStore

Husqvarna Guide Bar X-Force .325" 1.3mm

Husqvarna Guide Bar X-Force .325" 1.3mm

Select Bar Size
From $14.74

Original: $49.15

-70%
Husqvarna Guide Bar X-Force .325" 1.3mm—

$49.15

$14.74

The Story

Narrow gauge guide bar (PIXEL). Will directly fit the 435, 440, 450, 455 range of chainsaws.

NOTE  - They can also fit the 550 XP-560 XP chainsaw but a 0.050" - 1.3mm gauge chain must be used (non-standard size on the 550 XP and the 560 XP)

  • Bars with an extended centre plate giving extra support to the nose sprocket, a reinforced bar nose with geometry to increase strength and reduce pinch damages
  • A sealed bearing system and no grease hole prevents dirt from getting into the bearings and additionally eliminates the need to replenish grease.
  • New surface treatment process to improve paint adhesion
  • Available in .325 inch pitch in lengths 13-20".

Specifications

  • Pitch .325"
  • Gauge 1.3mm/0.50"
  • File size 4.8mm - 3/16"



Chain Type: Husqvarna X-CUT SP33G or Oregon 20LPX



Small mount guide bar

Technical data
Type of bar Laminated bar
Drive links 56-80
Pitch .325"
Gauge 1.3mm/0.50"
Bar length 13"-20"
Bar mount type Small


Available sizes
  • 13" - 56 drive links part number 582075356
  • 15" - 64 drive links part number 582075364
  • 18" - 72 drive links part number 582075372
  • 20" -  80 drive links part number 582075380

 

Description

Narrow gauge guide bar (PIXEL). Will directly fit the 435, 440, 450, 455 range of chainsaws.

NOTE  - They can also fit the 550 XP-560 XP chainsaw but a 0.050" - 1.3mm gauge chain must be used (non-standard size on the 550 XP and the 560 XP)

  • Bars with an extended centre plate giving extra support to the nose sprocket, a reinforced bar nose with geometry to increase strength and reduce pinch damages
  • A sealed bearing system and no grease hole prevents dirt from getting into the bearings and additionally eliminates the need to replenish grease.
  • New surface treatment process to improve paint adhesion
  • Available in .325 inch pitch in lengths 13-20".

Specifications

  • Pitch .325"
  • Gauge 1.3mm/0.50"
  • File size 4.8mm - 3/16"



Chain Type: Husqvarna X-CUT SP33G or Oregon 20LPX



Small mount guide bar

Technical data
Type of bar Laminated bar
Drive links 56-80
Pitch .325"
Gauge 1.3mm/0.50"
Bar length 13"-20"
Bar mount type Small


Available sizes
  • 13" - 56 drive links part number 582075356
  • 15" - 64 drive links part number 582075364
  • 18" - 72 drive links part number 582075372
  • 20" -  80 drive links part number 582075380